Page 16 - DOMESTIC GREENHOUSE, made in italy, URBAN CULTIVATOR, INDOOR GARDENING

MiobiO - Use & Maintenance Manual 16 // 42
2. TANK FILLING
When initially switching MiobiO on, the tank must be empty; and the lights of the four
control buttons will
flash. To fill the tank follow the instructions below:
Pull on the handle and take out the tank until the end of the grooves.
Take out the tank plug and fill with 20 litres of water.
If you wish you can insert a funnel into the plughole and then fill with 20 litres of water.
Or simply stick your finger into the hole in the plug itself, lift off the plug and fill with 20 litres of water.
Put the tank plug back on and re-enclose the tank to its original position.
Once this operation has been carried out, the water control panels will stop flashing and will be ready to be set.
General Note: the tank should be filled with clean and soft (low limestone percentage) water.